• Home
  • Company
  • What is Calucem?
  • Sales Offices
  • Quality Control
  • Products
  • Compare Products
  • HiPerCem®
  • ISTRA Types
  • ISTRA 40
  • ISTRA 45
  • ISTRA 50
  • Packaging
  • REFCON® plus
  • Packaging
  • Special Products
  • REFCON® plus
  • Packaging
  • Applications
  • Building Chemistry
  • Construction Industry
  • Pipes & Aggregates
  • Refractory Industry
  • Reprocessing
  • Case Studies
  • Sample Order
  • News & Events
  • Overview
  • Contact
  • Mailform
  • Sales Offices
  • Africa/Middle East
  • Asia/Pacific
  • Europe
  • North America
  • South & Latin America
  • Procurement

    LUMNITE® MG is a fused, low purity Calcium Aluminate Cement (CAC) designed to contribute special properties in materials for the building chemistry, construction, and related applications. LUMNITE® MG is only available on the American market.

    LUMNITE® MG is composed of calcium aluminate phases which have the following characteristics:

    • High early strength
    • High abrasion resistance
    • Resistance to biogenic sulfuric acid corrosion and other forms of chemical attack

    LUMNITE® MG has a shelf life of approximately six months if stored in a dry environment with small temperature variations. Other environments may shorten or extend the shelf life.



    LUMNITE® MG is produced by melting selected raw materials (bauxite and limestone) in special kilns. After cooling, the clinker is ground using ball mills.


    LUMNITE® MG is tested according to ASTM and other accepted procedures. Quality control data is available for each production lot.

    The production plant is certified according to EN ISO 9001 – certificate number CH99/0297 and the Environmental Management System EN ISO 14001 – certificate number CH02/0862.

    Technical data

    The following information represents typical ranges for the chemical and physical properties of LUMNITE® MG produced at our plant.

    Mineralogical composition

    LUMNITE® MG contains mainly monocalcium alu-minate (CA). This mineral phase is responsible for the high early strength. When mixed with water, LUMNITE® MG forms calcium aluminate hydrates as its hydration products.

    Mineral phases of LUMNITE® MG

    Main mineral phase CA
    Minor mineral phases C2AS, CT, C12A7

    Chemical composition, % (ASTM C-114)

    SiO2 6.0% max
    Al2O3 38.0-42.0%
    Fe2O3 13.0-17.0%
    CaO 36.0-40.0%
    MgO = 1.5%
    SO3 < 0.4 %

    Physical properties

    % retained on 325 mesh 10 - 25%
    Blaine Fineness (ASTM-204) 310 - 370 m²/kg
    Bulk density 1.15 g/ cm³
    Specific gravity 3.2-3.3
    Approximate melting point: 1270°C / 2300°F

    Setting time and water demand

    The setting time is determined by ASTM C-403 using a test mortar. The strength and water demand are determined by ASTM C-109.

    After setting, strength develops very rapidly. LUMNITE® MG is a cement with very high early strength and high compressive strength. After one day, the compressive strength is typically higher than Type I Portland cements after 28 days.

    Typical development of strength versus time

    Time 6 hrs 1 day
    Compressive Strength (MPa) >10 >35
    Typical Development of Compressive Strength - LUMNITE® MG

    Resistance against corrosion

    High resistance against waste waters in combination with extraordinary abrasion resistance and high resistance against biogenic sulfuric acid corrosion (BSAC) makes LUMNITE® MG an ideal product for sewer systems and waste water plants. When LUMNITE® MG is mixed with water, the hydration products of calcium aluminate cement are formed. They are extremely resistant against aggressive, slightly acid waters (pH factor > 3) including water soluble sulfates.


    LUMNITE® MG can be used in mild refractory applications, such as artificial fireplace logs and hearths, where temperatures do not exceed 1200° C (2200° F).

    Mixing advice

    As with Portland cement, ambient conditions and temperatures of the ingredients will influence the length of time LUMNITE® MG concretes and mortars will remain plastic and workable. Higher temperatures naturally will reduce this time while lower temperatures will extend it. Building construction products are extremely sensitive to the characteristics of each ingredient in the mix, and may require lab testing to obtain optimum properties.

    Safety instructions

    Please refer to our Material Safety Data Sheets for complete information. In general, CALUCEM cal-cium aluminate cements are not known to contain hazardous or toxic materials.

    Important notice

    The information and statements herein are believed to be reliable, but are not to be construed as a war-ranty or representation for which we assume legal responsibility. No warranty, representation or condi-tion of any kind, expressed or implied (including NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) SHALL APPLY. Having no control over the use of cement, the seller will not guarantee finished work, nor shall the seller be liable for consequential damages.

    Note of caution

    Dry cement powder is non-hazardous, but will act as an irritant if airborne cement dust is breathed. When mixed with water to make concrete, mortar or grout, skin or eye contact may cause mild to severe irritation. Care should be taken to minimize contact with cement powder or paste, and to avoid breath-ing any airborne cement dust.